Fuel Systems and Accessories

This page contains all parts related to carburetors, fuel systems and delivery.

This page contains lots of odds and ends that are often overlooked, but that are essential to make sure everything goes together smoothly and without any delays.

Shown above are our BRAND NEW fuel pump pushrods. These work for all big block engines, all years. Why clean up and reuse a worn out factory piece when we offer these brand new ones at such a good price?

Part No: 200-1027 - Fuel Pump Pushrod - NEW. Price: $9.95.

Shown above is our billet aluminum fuel pump blockoff plate. This is the nicest one we've seen anywhere. Showcar quality piece machined from a piece of solid aluminum, ball milled and fully polished to a high sheen. Use one of these when running an electric fuel pump instead of a mechanical engine driven pump. This helps the engine develop more horsepower, since engine power is no longer being used to drive the fuel pump.

Part No: 121-1032 - Fuel Pump Blockoff Plate - Billet Aluminum - NEW. Price: $14.95.

Shown above is our new fuel pump blockoff plate. Use one of these when running an electric fuel pump instead of a mechanical engine driven pump. This helps the engine develop more horsepower, since engine power is no longer being used to drive the fuel pump. These are quality chrome plated steel for good looks and corrosion resistance. Even includes the gasket!

Part No: 121-1023 - Fuel Pump Blockoff Plate - Chrome Plated - NEW. Price: $7.95.

Don't forget bolts when ordering your fuel pump block-off plates. Our ARP polished stainless steel Fuel Pump Blockoff bolt & washer bolt kits are exactly what people mean when they say "show quality." Made from ARP's proprietary "300" stainless steel alloy, they are rated at a minimum 170,000 PSI, which is even stronger than a grade 8 bolt! And, you can't beat the quality, shine and corrosion resistance of polished stainless. Nothing resists the ravages of weather, time and even repeated tightening and loosening like stainless. These are truly maintenance free! They also feature a reduced diameter 12pt head. Matching polished stainless washers are included. These can be used with either our billet aluminum or chrome steel fuel pump block-off plates. They also work with our billet aluminum water necks.

Part No: 129-1031 - ARP Bolt Kit - Fuel Pump Block-off Plate or Billet Water Neck - Stainless - Price: $7.95

Shown above is our new polished billet aluminum air cleaner. Includes a 14" x 4" element. This has a super modern and clean look, it'll outshine the stamped steel chrome plated ones all day long. These look great with our matching ball milled billet breathers (part number 121-1036) on our VALVE COVERS page. An awesome finishing touch for your new stroker engine.

Part No: 121-1050 - Billet Air Cleaner - With Ball Milling - NEW. Price: $59.95.

We now carry carburetor base gaskets. These are for Holley 4150 carbs. Don't get stuck putting that new stroker motor together and realize you remembered to order everything except the carb gasket. Make sure these details are taken care of, and it'll be one less thing to hold up your build. We also carry other carburetor essentials such as fuel lines, return spring kits, carb stud kits, etc.

Part No: 121 -1039 - Carb Base Gasket - Price: $6.95

We now carry chrome carburetor fuel lines. These are for Holley 4150 DOUBLE PUMPER carbs. (carbs with two metering blocks.)  These are nice because the end is NPT (pipe) thread, allowing you to use an adapter to run either regular black hose with a hose clamp or AN braided line. Some of the cheaper versions of this part are available only with a nipple molded on the end, so there is no way to use them with braided line. These also feature an 1/8" NPT fitting so you can run a fuel pressure gauge (if desired.) Make sure these details are taken care of, and it'll be one less thing to hold up your build. We also carry other carburetor essentials such as gaskets, return spring kits, carb stud kits, etc.

Part No: 121 -1040 - Holley Fuel Line - Double Pumper - Price: $14.95

We now carry chrome carburetor throttle return spring kits. These work great with Holley carbs. They include a bracket which bolts to the base of the carb, as well as two sets of springs, along with bushings to make sure there is no binding, and that everything works nice and smooth. A small detail that is often forgotten. Make sure these details are taken care of, and it'll be one less thing to hold up your build. We also carry other carburetor essentials such as gaskets, fuel lines, carb stud kits, etc.

Part No: 121 -1041 - Holley Return Spring Kit - Price: $12.95

We now carry carb stud kits. These work great with Holley 4150 carbs. Length is 1-3/8" long. Includes studs, nuts and washers. Zinc plated for corrosion resistance and good looks. A small detail that is often forgotten. Make sure these details are taken care of, and it'll be one less thing to hold up your build. We also carry other carburetor essentials such as gaskets, return spring kits, fuel lines, etc.

Part No: 121 -1042 - Carb Stud Kit - Price: $7.95

We started using these on our crate and test motors for protection during storage and shipping, and found they were so handy that we decided to start offering them as a convenience. They are a plastic formed "hat" or cover which fits over the carb and seals all dust and debris tightly out.  These work great with Holley 4150 carbs, or any carbs with a 5 1/8" neck. A small detail that is often forgotten. We also carry other carburetor essentials such as gaskets, return spring kits, fuel lines, etc.

Part No: 121-1043 - Carb Cover - Price: $7.95

 

We also carry bolt kits to attach the fuel pump or fuel pump blockoff plate to the engine. See our BOLT KITS page for details.

Home

   

All website content copyright 440 Source

(661) 951-3700