|
Valve Locks We carry nearly every style of valve locks, including hardened heavy duty replacements for the stock Chrysler style 2 and 4 groove valves, and single groove locks for aftermarket stainless valves. We also stock a large assortment of bronze valve guides, liners and hardened seats for cylinder head rebuilding. Give us a call for details. We also sell replacement parts for
rebuilding heads. We now carry: |
| Shown above is our HEAVY DUTY premium
alloy hardened intake valve locks. These are for use with the OE style 3/8"
2 groove factory intake valves. Sold in sets of 16. Use 1 set per engine,
(for intake valves only, you must order the set below for exhaust valves.) Part No: 101-1036 - Hardened Valve Locks - 3/8" 2 Groove Intake - Set of 16 - NEW. Price: $9.95 |
| Shown above is our HEAVY DUTY premium
alloy hardened exhaust valve locks. These are for use with the OE style 3/8"
4 groove factory exhaust valves. Sold in sets of 16. Use 1 set per engine,
(for exhaust valves only, you must order the set above for intake valves.).
Part No: 101-1037 - Hardened Valve Locks - 3/8" 4 Groove Exhaust - Set of 16 - NEW. Price: $9.95 |
| Shown above is our single groove
STAMPED hardened valve locks. These are for use with aftermarket Stainless
intake and exhaust valves with 3/8" Single groove type locks. Very nice
quality locks. Sold in sets of 32. Use 1 set per engine, (covers both intake
and exhaust valves.) Part No: 101-1038 - Valve Locks - Stamped - 3/8" Single Groove - Set of 32 - NEW. Price: $12.95 |
| Shown above is our single groove
FULLY MACHINED hardened valve locks. Instead of being manufactured by a
stamping press from a piece of sheet steel, as are the stamped locks above,
these are fully machined or "cut" from a solid block of steel. A much more
time consuming and expensive process, however the final product ends up
considerably stronger. These are for use with aftermarket Stainless intake
and exhaust valves with 3/8" Single groove type locks. Very nice quality
locks. Sold in sets of 32. Use 1 set per engine, (covers both intake and
exhaust valves.) Part No: 101-1039 - Valve Locks - Machined - 3/8" Single Groove - Set of 32 - NEW. Price: $29.95 |
All website content copyright 440 Source.
(661) 951-3700